2/24/2008
Removal of the rear wheel from hub –
1.This is held on using three stiff nuts (either K Nuts or Nyloc Nuts)
2.Determine the size of socket required (normally  13mm or 10mm)
3.Holding the firmly with one hand wheel remove all nuts
4.The wheel can be removed
 
NOTE CHECK THAT THE RIM DOES NOT HAVE ANY DAMAGE EVIDENT AND FIXING HOLES ARE ELONGATED, CHECK THE STUDS (THREAD) FOR DAMAGE / STRETCHING  IF SO REPLACE.
maccKARTING Limited
Home
About Us
Contact Us
Karting Tips
Links
Terms & Conditions
http://www.macckartingonline.co.uk/ekmps/shops/y201499/resources/Image/macckarting%20top%20banner.jpg
maccKARTING Limited will not accept any liability for injury or accidents arising from racing, driving or any other use of the tips provided.
All tips  / how to guides are general, certain kart types may vary slightly from the tips provided.
Karting tips can be printed and copied, It is forbidden to use Karting Tips documents for commercial gain or publish this document in any media form without the express permission of maccKARTING Limited
karting tips.jpg