2/24/2008
Removal of the floor tray –
1.Floor trays are usually secured by six nuts
and bolts
2.Locate positions and determine the size of
spanner/allen key required
3.It is always best to turn the nut rather than the bolts and this
avoids rounding out the Allen key
4.Remove all nuts/bolts/rubber washers and any
special washers
5.Remember the order of the items
6.Once all bolts are removed the floor tray will drop out
to the bottom of the chassis leaving the chassis exposed
NOTE - CHECK FOR ANY CRACK TO WELDS OR ANY UNSERVICABLE
DAMAGE
maccKARTING Limited will not
accept any liability for injury or accidents arising from racing, driving or
any other
use of the tips provided.
All tips / how to guides are general, certain kart
types may vary slightly from the tips provided.
Karting tips can be printed
and copied, It is forbidden to use Karting Tips documents for commercial gain
or publish
this document in any media form without the express permission of maccKARTING
Limited
