2/24/2008
Removal of the front nose cone (Spoiler) –
1.The nose cone is held on with two quick release clips,
sometime cable ties are used to ensure clamps remain in place
2.Remove any tie raps using snips be careful as they are sharp
3.Un clip the quick release brackets by pulling on the tab
4.Pull the nose cone away from the bumper, you may need to
lift the front bumper loop to free the bumper, front bumper loops are designed to lift up
slightly the top hole of the Alloy clamp between the lower and upper bumper loop is oval to allow
for the move
maccKARTING Limited will not
accept any liability for injury or accidents arising from racing, driving or
any other
use of the tips provided.
All tips / how to guides are general, certain kart
types may vary slightly from the tips provided.
Karting tips can be printed
and copied, It is forbidden to use Karting Tips documents for commercial gain
or publish
this document in any media form without the express permission of maccKARTING
Limited
