2/24/2008
Removal of a steering column –
1.Disconnect both tracking rods from the lower
portion of the steering column
2.Some floor trays have a hole drilled in line with the
bottom of the column, if not you will need to remove the floor tray before continuing to
point 3.
3.Locate the lower nut or Allen Key at the
bottom of column
4.Remove the base nut
or Bolt(depends on kart model using the appropriate spanner (usually 13mm or 17mm)
5.Next locate the Steering column collar fixing
bolt
6.Remove the nut keeping any spacers and washers making
sure you remember what order they were fitted in.
7.Now determine the size of spanners/allen keys required
to undo the upper mounting position bolt, remove bolt, remembering the quantity and order
they were removed in, the steering column is now ready for removal
NOTE - CHECK FOR ANY CRACK TO WELDS OR ANY UNSERVICABLE
DAMAGE
maccKARTING Limited will not
accept any liability for injury or accidents arising from racing, driving or
any other
use of the tips provided.
All tips / how to guides are general, certain kart
types may vary slightly from the tips provided.
Karting tips can be printed
and copied, It is forbidden to use Karting Tips documents for commercial gain
or publish
this document in any media form without the express permission of maccKARTING
Limited
