2/24/2008
Removing a Steering Wheel –
1.Locate the fixing bolt that retain the
steering wheel boss to the column
2.Determine the size of spanners and allen keys
(Normally 10mm Spanner & 5mm Allen)
3.Remove all nuts
4.Push out Bolt, if required tap gently with
Nylon or rubber hammer
5.Once bolts are removed the steering wheel and
boss can be removed from the Column
6.If the boss does not pull straight off the column rotate
in a anti clockwise direction this will unscrew the boss from the column
7.Once removed locate the three bolts which fix the
steeling wheel to the boss (normally require a 10mm spanner and 5mm Allen key)
8.Once removed the steering wheel should simply
separate from the boss
NOTE - CHECK FOR ANY CRACKS TO WELDS OR ANY UNSERVICABLE
DAMAGE
maccKARTING Limited will not
accept any liability for injury or accidents arising from racing, driving or
any other
use of the tips provided.
All tips / how to guides are general, certain kart
types may vary slightly from the tips provided.
Karting tips can be printed
and copied, It is forbidden to use Karting Tips documents for commercial gain
or publish
this document in any media form without the express permission of maccKARTING
Limited
