2/24/2008
Removing a hub less front wheel –
1.Obtain the correct size socket for the large nut that
holds the wheel in place on the stub axle (normally 22mm)
2.Using a ratchet position the tool and rotate
anti clockwise, using sufficient
force
3.Un-wind the nut off the thread (replace Nyloc
nuts regularly)
4.Make a note of the spacer size and order
5.Remove any spaces that maybe slid on the
axle
6.Slide off the wheel from the axle, being
careful not to lose any existing wheel spaces
maccKARTING Limited will not
accept any liability for injury or accidents arising from racing, driving or
any other
use of the tips provided.
All tips / how to guides are general, certain kart
types may vary slightly from the tips provided.
Karting tips can be printed
and copied, It is forbidden to use Karting Tips documents for commercial gain
or publish
this document in any media form without the express permission of maccKARTING
Limited
