2/24/2008
Installation of side pod and fixing bar
1. It is usually
easier to fit the pod to the bar when the bar is off the chassis; this allows
greater access while
it is on the bench.
2.Locate all fixing bolts and position bolts
through all attachment holes
3. Ensuring you fit
penny washers on the inside face against the plastic pod, to stop the nut eventually pulling through the pod.
4.Once all bolts a tightened position the pod bar into the
chassis positions and then push into position and line up fixing holes.
5.Fit the attachment bolts and tighten up
complete.
maccKARTING Limited will not
accept any liability for injury or accidents arising from racing, driving or
any other
use of the tips provided.
All tips / how to guides are general, certain kart
types may vary slightly from the tips provided.
Karting tips can be printed
and copied, It is forbidden to use Karting Tips documents for commercial gain
or publish
this document in any media form without the express permission of maccKARTING
Limited
