2/24/2008
Installation of the rear wheel
1. Prior to
installation of the wheel check that the attachment holes are not elongated,
and there is no
cracking or damage to the rim, there is no damage to the hub and the studs are
in good condition,
and a good check for older outfits would be to measure whether the stubs on
the hub are
stretched, this would lead to a large failing on the track and you can test
this by comparing it to
a new stud.
2.Once you satisfied with the standard of your
equipment position the wheel.
3. Ensuring you have the correct rotation
on the tyre
4. Tighten up the three fixing nuts,
either Nyloc or k-fast
5. Then rotate the wheel with speed to
ensure you don't have any distortions in the rim.
maccKARTING Limited will not
accept any liability for injury or accidents arising from racing, driving or
any other
use of the tips provided.
All tips / how to guides are general, certain kart
types may vary slightly from the tips provided.
Karting tips can be printed
and copied, It is forbidden to use Karting Tips documents for commercial gain
or publish
this document in any media form without the express permission of maccKARTING
Limited
