2/24/2008
Installation of the front bumper
1.Locate all fixings usually two bolts and nuts
with washers.
2. Position bumper and fit bolts and
tighten up accordingly
3. Ensure you don't over tighten as you do need
slight movement in the bumper when fitting the nose cone.
maccKARTING Limited will not
accept any liability for injury or accidents arising from racing, driving or
any other
use of the tips provided.
All tips / how to guides are general, certain kart
types may vary slightly from the tips provided.
Karting tips can be printed
and copied, It is forbidden to use Karting Tips documents for commercial gain
or publish
this document in any media form without the express permission of maccKARTING
Limited
